- 2-in/2-out SuperSpeed USB 3.0 audio interface
- Support for recording and playback up to 24-bit/192 kHz
- Loopback function for webcasting, podcasting, gaming, and other live streaming applications
- Low latency overdubbing and direct monitoring for zero-latency monitoring in mono or stereo
- Two combo balanced XLR/TRS input connectors accept both mic- and line-level signal
- Hi-Z switches allow direct connection of electric guitar or bass
- Switchable +48V phantom power
- Two balanced TRS output jacks for connection to amplifiers or self-powered speakers
- ¼” headphone jack with dedicated level control
- Independent gain controls and clip LEDs for each input
- Large knob output volume control
- Direct Monitoring switch for zero latency monitoring in mono or stereo
- MIDI In and Out
- Compatible with all popular DAW and streaming software, including Cubase, Logic, Garage Band, Pro Tools, Ableton Live, and others
- High-performance mic preamps with up to +60dB of amplification
- 120dB of dynamic range
- 4x upsampling during A/D and D/A conversion for reduced noise and enhanced fidelity
- Asynchronous transfer system unaffected by computer jitter
- Bus powered—no AC power required
- Robust metal housing ensures roadworthiness
- Works with all USB 3.0-equipped computers and iPads*
| Input 1/2 connectors: | XLR/TRS combo jacks (XLR: 2 hot / TRS: TIP hot) |
| Input gain: | 0 to 60dB in 1dB steps |
| Input impedance: | 5kΩ (1 MΩ (when Hi-Z ON) |
| Maximum input level: | +12 dBu (@0dBFs) |
| Phantom power: | +48V |
L/R OUTPUT
| Type: | ¼” TRS jack (Balanced) |
| Maximum output level: | +14 dBu (@0dBFs) |
| Output impedance: | 100Ω |
PHONES OUTPUT
| Type: | ¼” stereo phone jack 20mW + 20mW (into 32Ω load) |
| Maximum output level: | +8 dBu (@0dBFs) |
| Output impedance: | 33Ω |
DYNAMIC RANGE
| A/D: | 118dB typical (IHF-A) |
| D/A: | 120dB typical (IHF-A) |
NUMBER OF AUDIO CHANNELS
| Recording: | 2 |
| Playback: | 2 |
OTHER
| Frequency characteristics: | -1.0 dB: 20 Hz – 60 kHz @ 192kHz -1.0 dB: 20 Hz – 40 kHz @ 96kHz -1.0 dB: 20 Hz – 20 kHz @ 44.1kHz |
| Measured conversion noise (EIN): | -125dBu (IHF-A) @ 60dB, 150Ω input |
| Sampling frequencies: | 192kHz, 176.4kHz, 96kHz, 88.2kHz, 48kHz, 44.1kHz |
| Bit depth: | 24-bit |
| Interface: | USB 3.0 |
| MIDI In/Out: | 5-pin DIN jack |
| Power source: | USB 3.0 Bus Power / AD-14 AC adapter (DC 5V 1A) |
| Power consumption: | 5 W maximum |
| Dimensions: | 113.9mm(D) x 176.0mm(W) x 46.2mm (H) |
| Weight: | 750g |
UAC-2 SYSTEM REQUIREMENTS
| Windows: | OS： Windows® 8 ~ 11 (32bit/64bit) CPU: Intel® Core i3 or faster* USB: USB 3.0/USB 2.0** * Operation is not guaranteed with CPUs from Atom, Celeron or Pentium series or CPUs made by AMD. ** Only USB host controllers with Intel Chipsets are supported. Operation is not guaranteed when used with USB hubs or expansion cards. |
| Mac: | OS： macOS 10.14 ~ 15 CPU: Intel® Core i3 or fasterUSB: USB 3.0/USB 2.0** Operation is not guaranteed when used with USB hubs or expansion cards. |
| iPhone/iPad: | OS: iOS 7.1 ~ 18 * Optional power adapter(AD-14) and Apple Camera Connection kit or Lightning to USB Camera Adapter required. |
Прегледи
Нема Прегледи сеуште.